Duraplate uhs data sheet.

DURA-PLATE® UHS Epoxy (Part A) White Base Not available. Liquid. +1 703-741-5970 SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Relevant identified uses of the substance or mixture and uses advised against Not applicable. B62W210 …1 ct. Dura-Plate 2300 as needed to fi ll surface imperfections 1 ct. (Optional) Primer as defi ned above 1 ct. Dura-Plate 6000 60.0-125.0+** (1,500-3,125) ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company.This UHS lining is suitable for low-temperature applications and cures at 25°F (-3°C). Fast-Clad ER’s formulation is balanced to maintain required application properties over a range of film thicknesses and edge retention (>70%). Plural application equipment is required to apply Fast-Clad ER due to the product’s material characteristics. DURA-PLATE® UHS Epoxy (Part B) Green Hardener B62GV210 Liquid. 1-216-566-2917 (US) / +(61)290372994 (AUS) SAFETY DATA SHEET Product identifier Product code Product type Emergency telephone number (with hours of operation) Section 1. Identification:::: Supplier's details :The Sherwin-Williams Company 101 W. Prospect Avenue Cleveland, OH 44115

2 Cts. Nova-Plate UHS 10.0-12.0 (250-300) Steel, Immersion & Atmospheric 1 Ct. Nova-Plate UHS 15.0-35.0 (375-875) NOTE: Nova-Plate UHS may be applied at alternate thicknesses, up to 60 mils (1,500 microns), depending on application conditions. Consult your Sherwin-Williams representative for additional information.Refer to the MSDS sheet before use. Published technical data and instructions are subject to change without notice. ... Dura-Plate UHS Clear Laminate 40.0-45.0 (1000 ...NOVA-PLATE® UHS Ultra High Solids Epoxy (Part B) Standard Hardener B62V221 Liquid. 1-216-566-2917 (US) / +(61)290372994 (AUS) SAFETY DATA SHEET Product identifier Product code Product type Emergency telephone number (with hours of operation) Section 1. Identification:::: Supplier's details :The Sherwin-Williams Company 101 W. Prospect …

DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming.

Formulated specifically for immersion and atmospheric service in marine and industrial environments, Dura-Plate® 235 Multi-Purpose Epoxy provides exceptional performance in corrosive environments and can be applied at temperatures as low as 0°F (-18°C).PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray.1 ct. Dura-Plate 2300 as needed to fi ll surface imperfections 1 ct. (Optional) Primer as defi ned above 1 ct. Dura-Plate 6000 60.0-125.0+** (1,500-3,125) ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company.NOTE: Dura-Plate UHS may be applied at alternate thicknesses, up to 50 mils (1,250 microns), depending on application conditions. Consult your Sherwin-Williams representative for ... to obtain the most recent Product Data Sheet. DURA-PLATE® UHS EPOXY TANK LINING. Title: Dura-Plate UHS_1301-1.indd Author: dxg719 Created Date:

DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming.

1. " 3 $ 1 ( 2 3 ( " 2. DURA-PLATE 8200is an advanced technology ceramic novolac epoxy. It is engineered to provide protection from crude oil mixes and aggressive chemicals stored at high tem- peratures in high gradient environments. It can be applied by plural or single leg application and cures to service in 24 hours in most cases.

Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. • Airless Spray • Low odor • High fl ash point, >200°F (93°C) • Low Temperature Hardener for applications from 40°F to 77°F (4.5°C to 25°C) • NSF approved to Standard 61/600 for potable water (tanks of ...Description. Supplier Links. Sherwin-Williams Protective & Marine Coatings. Cleveland, OH, USA. Dura-Plate® UHS Primer. Dura-Plate® UHS PRIMER is an ultra high solids epoxy … Refer to the MSDS sheet before use. Published technical data and instructions are subject to change without notice. ... Dura-Plate UHS Clear Laminate 40.0-45.0 (1000 ... PRODUCT DESCRIPTION. Nova-Plate UHS is an ultra high solids epoxy novolac amine engineered specifi cally for immersion service in ballast tanks, oil tanks, refi ned fuel storage tanks, and for well deck overheads. The high build, edge retentive properties of Nova-Plate UHS provide superior protection compared to conventional epoxies.Apr 27, 2024 · DURA-PLATETM UHS EPOXY TANK LINING www.sherwin-williams.com/protectiveEMEA This Data Sheet is specifi cally subject to the disclaimer …

Dura-Plate 301 is an excellent surface and humidity anti-corrosive epoxy, formulated for application over marginally prepared surfaces. Apply over wet surfaces. Apply over flash-rust (WJ2M – SSPC VIS4) Can be applied over existing coatings. Standard airless, brush or roller application. Excellent adhesion – up to 25 MPa (3625 PSI).A two-component, ultra high-solids epoxy amine. Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Primer is formulated specifically as a primer for use under Dura-Plate UHS topcoat. The primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel ...PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray.Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range of contents from crude oil to potable water. Please note: Light Green is made to order with an extended lead time of 28 days and a minimum order quantity of 200L. ... Where we have access to the Product Data Sheet from the manufacturer, we will either provide ...Dura-Plate® 8200 High Temperature Epoxy Part A, Gray MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a). A two-component, high-solids, high-build amine epoxy coating. Capable of withstanding extreme conditions of abrasion and corrosion, Dura-Plate® 154 Epoxy Splash Zone Coating can be applied from 10-40 mils (250-1000 microns) dry in one coat, as well as over prepared, damp substrates while providing adequate adhesion and a protective film. DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming.

DURA-PLATE® UHS Epoxy (Part A) OAP White Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer …Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. • Airless Spray • Low odor • High fl ash point, >200°F (93°C) • Low Temperature Hardener for applications from 40°F to 77°F (4.5°C to 25°C) • NSF approved to Standard 61/600 for potable water (tanks of ...

Duraplate 301 Dura-Plate 235: Best Resistance Least Resistance: ... ta sheets for specific da Offshore structures use information ... te UHS Dura-Pla plate 301 Dura Nova-Plate 325 ank Clad HS Epoxy T -Glass FFSher; Ketimines; Macropoxy 920 PrePrime; Phenalkamines ; te 235Dura-Pla;Dura-Plate® 2300. A three-component, epoxy modified cementitious resurfacer containing Portland Cement, hydrophobic thixotropes, fiber reinforcement, graded silica sand and other abrasion resistant aggregates. Used for resurfacing, patching and filling voids (bugholes) in concrete and masonry structures, Dura-Plate® 2300 provides a hard ...Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming. Low temperature application, 0°F (-18°C) Surface tolerant - damp surfaces. Provides salt water and fresh water immersion resistance. Approved as a primer per MIL-PRF-23236, Type V, Class 7, Grade C.Cleveland, OH, USA. Nova-Plate® UHS Epoxy. Nova-Plate® UHS Topcoat is an ultra high solids epoxy novolac amine engineered specifically for immersion service in ballast tanks, oil tanks, refined fuel storage tanks, and for well deck overheads. The high build, edge retentive properties of Nova-Plate® UHS Topcoat provide superior protection ...Aerospace Coatings from Sherwin-Williams. Sherwin-Williams offers the products, colors, and collaboration to successfully bring your aircraft to life with exceptional protection and color. Sherwin-Williams is a leading manufacturer of high-quality interior and exterior aerospace paints and coatings systems protecting a variety of aircraft.Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming. Low temperature application, 0°F (-18°C) Surface tolerant - damp surfaces. Provides salt water and fresh water immersion resistance. Approved as a primer per MIL-PRF-23236, Type V, Class 7, Grade C.Standard hardener preferred for brush & roll due to pot life. Shelf Life: 24 months, unopened Store indoors at 40°F (4.5°C) to 100°F (38°C). Flash Point: >230°F (110°C), PMCC, mixed Reducer: Not recommended. with standard hardener 55°F (13°C) 77°F (25°C) 50% RH 50% RH. Touch: 15 hours 4 hours Handle: 36 hours 14 hours.DURA-PLATE® UHS Epoxy (Part A) OAP White Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer …Refer to the MSDS sheet before use. Published technical data and instructions are subject to change without notice. ... Dura-Plate UHS Clear Laminate 40.0-45.0 (1000 ...Sherwin-Williams Dura-Plate UHS Primer with Opti-Check OAP (Optically Activated Pigments) technology is a specially designed primer for use under Sherwin-Williams Dura-Plate UHS. It is ideal for use over prepared steel or concrete surfaces in industrial and marine exposures.Airless Spray Low odour Low VOC High flash point, >93°C …

Jan 29, 2018 · Airless Spray • One coat protection. Low VOC • Low odor • High flash point, >200°F (93°C) Can be used with 11⁄2 oz. fiberglass mat. Low Temperature Hardener for …

Sherwin-Williams Protective & Marine Coatings launched Dura-Plate 6000, a new 100 percent solids, high-build, high-strength, reinforced epoxy lining for concrete and steel in severe wastewater service environments. The durable lining material offers asset owners and applicators a variety of time and cost efficiencies due to its fast return-to …

Dura-Plate® 8200 High Temperature Epoxy Part A, Gray MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::PRODUCTDESCRIPTION. DURA-PLATE UHS For use over prepared steel or concrete surfaces in industrial and marine The rapid return to service and high build, edge retentive properties of this superior tank lining provide superior protection. Can be applied by conventional airless pumps in a single coat, Dura-Plate UHS is the user friendly solution ...Please reference the individual product datasheet for exact specifications on the Datasheets tab above or through Search. Engineered specifically for immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS epoxy provides superior protection through its high build, edge-retentive properties as compared to ...2 Cts. Nova-Plate UHS 10.0-12.0 (250-300) Steel, Immersion & Atmospheric 1 Ct. Nova-Plate UHS 15.0-35.0 (375-875) NOTE: Nova-Plate UHS may be applied at alternate thicknesses, up to 60 mils (1,500 microns), depending on application conditions. Consult your Sherwin-Williams representative for additional information.Dura-Plate UHS Epoxy Primer. PRODUCT DESIGNATIONS. Dura-Plate - B62H210, B62L210, B62V210 (optically active pigment) MIL-PRF-23236. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL. This NAVSEA-REVIEWED ASTM F-718 data sheet is the only data sheet approved for use when ...Jun 7, 2023 · DURA-PLATE™ UHS FAST CURING SOLVENT FREE EPOXY LINING FEATURES • Fast curing to service +/- 4 days • Single coat application • Opti-Check …In today’s fast-paced business environment, companies are constantly seeking ways to improve efficiency and streamline operations. One area where businesses can make significant im... Surface Preparation: BS EN ISO 8501-1 2007 Sa21⁄2. System Tested: 1 ct. Dura-Plate UHS @ 450 microns dft. Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 20.8 mg loss cycles, 1 kg load. Dura-Plate UHS Sher-Plate PW *Maximum of 28.0 mils (700 microns) for entire system The systems listed above are representative of the product's use, other systems may be appropriate. D (2 " + (, $ 1 The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams ...ENVIRONMENTAL DATA SHEET (Certified Product Data Sheet) 11 00 [3122] Date of Preparation Apr 19, 2024 PRODUCT NUMBER B62W211 PRODUCT NAME DURA-PLATE® UHS Epoxy (Part A), OAP White MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115

DURA-PLATE® UHS Epoxy (Part A) White Base B62W210 Liquid. 1-216-566-2917 (US) / +(61)290372994 (AUS) SAFETY DATA SHEET Product identifier Product code Product type Emergency telephone number (with hours of operation) Section 1. Identification:::: Supplier's details :The Sherwin-Williams Company 101 W. Prospect Avenue Cleveland, OH 44115 DURA-PLATE® UHS Epoxy (Part A) White Base Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: In today’s data-driven world, the ability to effectively present and analyze data is crucial for businesses and professionals. Microsoft Excel, a widely-used spreadsheet program, o...Instagram:https://instagram. hobby lobby large santa picturedavid benoit wrestler agepigeon forge tn outlet mallshampton gentry funeral home plainfield indiana A two-component, modified epoxy phenalkamine. Dura-Plate® 235. A two-component, modified epoxy phenalkamine. Formulated specifically for immersion and atmospheric service in marine and industrial environments, Dura-Plate® 235 Multi-Purpose Epoxy provides exceptional performance in corrosive environments and can be applied at temperatures as low as 0°F (-18°C). Surface Preparation: BS EN ISO 8501-1 2007 Sa21⁄2. System Tested: 1 ct. Dura-Plate UHS @ 450 microns dft. Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 20.8 mg loss cycles, 1 kg load. grand rapids pets craigslistjobs in gilmer tx DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Established in 1985, the company specializes in the design and production of dry freight vans, refrigerated vans, platform trailers, intermodal equipment, liquid tank trailers, engineered products, and composite products. Contact information: 866-877-5062. [email protected] wabashnational.com. rtc game day express schedule 2023 Dura-Plate® UHS | Sherwin-Williams. A two-component, ultra high-solids epoxy amine.DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete, steel and iron in severe service environments including splashzone areas on off shore platforms, wharf piles, jetties, chemical plants, pulp and paper mills and water treatment plants.Using Lysol spray is a great way to keep your home clean and germ-free. But before you use it, it’s important to understand the safety data sheet (SDS) for the product. An SDS prov...